A building code (also building control or building regulations) is a set of rules that specify the standards for constructed objects such as building
s and nonbuilding structure
s. Buildings must conform to the code to obtain planning permission
, usually from a local council. The main purpose of building codes is to protect public health
, safety and general welfare as they relate to the construction and occupancy of buildings and structures. The building code becomes law
of a particular jurisdiction when formally enacted
by the appropriate governmental or private authority.
Building codes are generally intended to be applied by architect
s, interior designer
s, constructors and regulators
but are also used for various purposes by safety inspectors
, environmental scientist
s, real estate developer
s, subcontractors, manufacturers of building products and materials, insurance
companies, facility managers, tenants
, and others. Codes regulate the design and construction of structures where adopted into law.
Examples of building codes began in ancient times.
In the USA the main codes are the International Building Code or International Residential Code BC/IRC
electrical codes and plumbing, mechanical codes. Fifty states and the District of Columbia have adopted the I-Codes at the state or jurisdictional level. In Canada, national model codes are published by the National Research Council of Canada
. In the United Kingdom, compliance with Building Regulations
is monitored by Approved Inspectors or Local Authority Building Control departments. Building Control regularisation charges apply in the event that work is undertaken which should have had been inspected at the time of the work if this was not done.
The practice of developing, approving, and enforcing building codes varies considerably among nations. In some countries building codes are developed by the government agencies or quasi-governmental standards organizations
and then enforced across the country by the central government
. Such codes are known as the national building codes (in a sense they enjoy a mandatory nationwide application).
In other countries, where the power of regulating construction and fire safety
is vested in local authorities
, a system of model building code
s is used. Model building codes have no legal status unless adopted or adapted by an authority having jurisdiction. The developers of model codes urge public authorities to reference model codes in their laws, ordinances, regulations, and administrative orders. When referenced in any of these legal instruments, a particular model code becomes law. This practice is known as 'adoption by reference'. When an adopting authority decides to delete, add, or revise any portions of the model code adopted, it is usually required by the model code developer to follow a formal adoption procedure in which those modifications can be documented for legal purposes.
There are instances when some local jurisdictions
choose to develop their own building codes. At some point in time all major cities in the United States
had their own building codes. However, due to ever increasing complexity and cost of developing building regulations, virtually all municipalities in the country have chosen to adopt model codes instead. For example, in 2008 New York City abandoned its proprietary ''1968 New York City Building Code'' in favor of a customized version of the International Building Code
. The City of Chicago
remains the only municipality
in America that continues to use a building code the city developed on its own as part of the ''Municipal Code of Chicago
In Europe, the Eurocode: Basis of structural design
, is a pan-European building code that has superseded the older national building codes. Each country now has National Annexes to localize the contents of the Eurocodes
Similarly, in India
, each municipality and urban development authority has its own building code, which is mandatory for all construction within their jurisdiction. All these local building codes are variants of a National Building Code, which serves as model code proving guidelines for regulating building construction activity.
Building codes have a long history. The earliest known written building code is included in the Code of Hammurabi
which dates from circa 1772 BC.
The book of Deuteronomy
in the Hebrew Bible
stipulated that parapet
s must be constructed on all houses to prevent people from falling off.
After the Great Fire of London
in 1666, which had been able to spread so rapidly through the densely built timber housing of the city, the Rebuilding of London Act
was passed in the same year as the first significant building regulation. Drawn up by Sir Matthew Hale
, the Act regulated the rebuilding of the city, required housing to have some fire resistance capacity and authorised the City of London Corporation
to reopen and widen roads. The Laws of the Indies
were passed in the 1680s by the Spanish Crown
to regulate the urban planning for colonies throughout Spain's worldwide imperial possessions.
The first systematic national building standard was established with the London Building Act of 1844. Among the provisions, builders were required to give the district surveyor two days' notice before building, regulations regarding the thickness of walls, height of rooms, the materials used in repairs, the dividing of existing buildings and the placing and design of chimney
s and drains
were to be enforced and streets had to be built to minimum requirements.
The Metropolitan Buildings Office
was formed to regulate the construction and use of buildings throughout London. Surveyors were empowered to enforce building regulations, which sought to improve the standard of houses and business premises, and to regulate activities that might threaten public health. In 1855 the assets, powers and responsibilities of the office passed to the Metropolitan Board of Works
The City of Baltimore
passed its first building code in 1859. The Great Baltimore Fire
occurred in February, 1904. Subsequent changes were made that matched other cities. In 1904, a Handbook of the Baltimore City Building Laws was published. It served as the building code for four years. Very soon, a formal building code was drafted and eventually adopted in 1908.
In Paris, under the reconstruction of much of the city under the Second Empire (1852–70)
, great blocks of apartments were erected
[New International Encyclopedia]
and the height of buildings was limited by law to five or six stories at most.
The structural failure of the tank that caused the Great Molasses Flood
of 1919 prompted the Boston Building Department to require engineering and architectural calculations be filed and signed. U.S. cities and states soon began requiring sign-off by registered professional engineers for the plans of major buildings.
The purpose of building codes is to provide minimum standards for safety, health, and general welfare including structural integrity, mechanical integrity (including sanitation, water supply, light, and ventilation), means of egress, fire prevention and control, and energy conservation.
Building codes generally include:
* Standards for structure, placement, size, usage, wall assemblies, fenestration size/locations, egress rules, size/location of rooms, foundations, floor assemblies, roof structures/assemblies, energy efficiency, stairs and halls, mechanical, electrical, plumbing, site drainage & storage, appliance, lighting, fixtures standards, occupancy rules, and swimming pool regulations
* Rules regarding parking
* Fire code
rules to minimize the risk of a fire and to ensure safe evacuation in the event of such an emergency
* Requirements for earthquake
, and tsunami
resistance, especially in disaster prone areas or for very large buildings where a failure would be catastrophic
* Requirements for specific building uses (for example, storage of flammable substances, or housing a large number of people)
* Energy provisions and consumption
* Grandfather clause
s: Unless the building is being renovated, the building code usually does not apply to existing buildings.
s on components
* Allowable installation methodologies
* Minimum and maximum room ceiling heights, exit sizes and location
* Qualification of individuals or corporations doing the work
* For high structures, anti-collision markers for the benefit of aircraft
Building codes are generally separate from zoning
ordinances, but exterior restrictions (such as setbacks) may fall into either category.
Designers use building code standards out of substantial reference books during design. Building departments review plans submitted to them before construction, issue permits r not
and inspectors verify compliance to these standards at the site during construction.
There are often additional codes or sections of the same building code that have more specific requirements that apply to dwelling
s or places of business and special construction objects such as canopies, signs, pedestrian
walkways, parking lot
s, and radio and television antenna
Current energy codes in the United States
The energy codes of the United States are adopted at the state and municipal levels and are based on the International Energy Conservation Code
(IECC). Previously, they were based on the Model Energy Code (MEC).
As of March 2017, the following residential codes have been partially or fully adopted by states:
* 2015 IECC or equivalent (California, Illinois, Maryland, Massachusetts, Michigan, Pennsylvania, New Jersey, New York, Vermont, Washington)
* 2012 IECC or equivalent (Alabama, Connecticut, Delaware, District of Columbia, Florida, Iowa, Minnesota, Nevada, Rhode Island, Texas)
* 2009 IECC or equivalent (Arkansas, Georgia, Idaho, Indiana, Kentucky, Louisiana, Montana, Nebraska, New Hampshire, New Mexico, North Carolina, Ohio, Oklahoma, Oregon, South Carolina, Tennessee, Virginia, West Virginia, Wisconsin)
* 2006 IECC or equivalent (Utah)
* <2006 IECC or no statewide code (Alaska, Arizona, Colorado, Kansas, Maine, Mississippi, Missouri, North Dakota, South Dakota, Wyoming)
Historical energy codes in the United States
As of September 2005, the following residential energy codes had been partially or fully adopted by states:
[Historical archives of the Building Codes Assistance Project.]
* 2003-2004 IECC or equivalent (Alaska, Arkansas, California, Connecticut, Idaho, Kansas, Nebraska, Maryland, Montana, New Mexico, Ohio, Pennsylvania, South Carolina, Utah, Virginia, Washington)
* 1998-2001 IECC or equivalent (Alabama, Delaware, District of Columbia, Florida, Georgia, Kentucky, Michigan, New Hampshire, New York, North Carolina, Oregon, Texas, Vermont, West Virginia, Wisconsin)
* <1998 IECC (Hawaii, Indiana, Iowa, Louisiana, Massachusetts, Minnesota, New Jersey, North Dakota, Tennessee)
* No statewide code / weaker (Arizona, Colorado, Illinois, Maine, Mississippi, Missouri, Nevada, Oklahoma, South Dakota, Wyoming)
As of January 2004, the following residential energy codes had been partially or fully adopted by states:
* 2003 IECC or IRC (Kansas, New Mexico, Utah)
* 2000 IECC or IRC or equivalent (Alabama, California, Idaho, Florida, Georgia, Kentucky, Maryland, New Hampshire, New York, North Carolina, Ohio, Oregon, Pennsylvania, Rhode Island, South Carolina, Texas, Virginia, Washington, West Virginia, Wisconsin)
* 1998 IECC (Oklahoma)
* 1995 MEC or equivalent (Alaska, Connecticut, Hawaii, Massachusetts, Louisiana, Minnesota, New Jersey, Vermont)
* 1993 MEC or equivalent (Delaware, Montana, North Dakota)
* 1992 MEC or equivalent (Arkansas, Indiana, Iowa, Tennessee)
* No code or code not EPAct compliant (Arizona, Colorado, Illinois, Maine, Michigan, Mississippi, Missouri, Nebraska, Nevada, South Dakota, Wyoming)
As of Fall 2000, the following residential energy codes had been partially or fully adopted by states:
* 2000 IECC rule making (Maryland, New York, Pennsylvania, South Carolina)
* 1995 MEC or equivalent (Alaska, California, Connecticut, Florida, Georgia, Hawaii, Louisiana, Massachusetts, Minnesota, New Hampshire, North Carolina, Ohio, Oklahoma, Oregon, Rhode Island, Utah, Vermont, Virginia, Washington, Wisconsin, Wyoming)
* 1993 MEC or equivalent (Alabama, Delaware, Kansas, Montana, North Dakota)
* 1992 MEC or equivalent (Arkansas, Indiana, Iowa, Kentucky, New Mexico, Tennessee)
* No code or code not EPAct compliant (Arizona, Colorado, Idaho, Illinois, Maine, Michigan, Mississippi, Missouri, Nebraska, Nevada, New Jersey, South Dakota, Texas, West Virginia)
As of 1998, three states (Ohio, Michigan, and Virginia) had adopted the 1993 MEC residential energy code. The remaining states had adopted either: a state-written code; a regional code; a prior version of the MEC or American Society of Heating, Refrigerating and Air Conditioning Engineers
standards; or no code at all.
* Building officials
* Building regulations in the United Kingdom
* Construction law
* Earthquake-resistant structures
* Energy Efficiency and Conservation Block Grants
* Outline of construction
* Seismic code
* Uniform Mechanical Code
* Variance (land use)
– permission to vary zoning
and sometimes building to code
IAPMO WebsiteIAPMO Codes WebsiteUniform Mechanical Code WebsiteUniform Plumbing CodeWebsiteUniform Solar, Hydronics & Geothermal Code WebsiteUniform Swimming Pool, Spa & Hot Tub Code Website