thumb|upright|Extensively redundant rear lighting installation on a Thai tour bus
, redundancy is the duplication of critical components or functions of a system with the intention of increasing reliability of the system
, usually in the form of a backup or fail-safe
, or to improve actual system performance, such as in the case of GNSS
receivers, or multi-threaded
In many safety-critical system
s, such as fly-by-wire
systems in aircraft
, some parts of the control system may be triplicated, which is formally termed triple modular redundancy
(TMR). An error in one component may then be out-voted by the other two. In a triply redundant system, the system has three sub components, all three of which must fail before the system fails. Since each one rarely fails, and the sub components are expected to fail independently, the probability of all three failing is calculated to be extraordinarily small; often outweighed by other risk factors, such as human error
. Redundancy may also be known by the terms "majority voting systems" or "voting logic".
Redundancy sometimes produces less, instead of greater reliability it creates a more complex system which is prone to various issues, it may lead to human neglect of duty, and may lead to higher production demands which by overstressing the system may make it less safe.
Forms of redundancy
In computer science, there are four major forms of redundancy,
* Hardware redundancy, such as dual modular redundancy
and triple modular redundancy
* Information redundancy, such as error detection and correction
* Time redundancy, performing the same operation multiple times such as multiple executions of a program or multiple copies of data transmitted
* Software redundancy such as N-version programming
A modified form of software redundancy, applied to hardware may be:
* Distinct functional redundancy, such as both mechanical and hydraulic braking in a car. Applied in the case of software, code written independently and distinctly different but producing the same results for the same inputs.
are usually designed with redundant parts as well, ensuring that if one part fails, the entire structure will not collapse. A structure without redundancy is called fracture-critical
, meaning that a single broken component can cause the collapse of the entire structure. Bridges that failed due to lack of redundancy include the Silver Bridge
and the Interstate 5 bridge over the Skagit River
Parallel and combined systems demonstrate different level of redundancy. The models are subject of studies in reliability and safety engineering.
Function of redundancy
The two functions of redundancy are passive redundancy and active redundancy
. Both functions prevent performance decline from exceeding specification limits without human intervention using extra capacity.
Passive redundancy uses excess capacity to reduce the impact of component failures. One common form of passive redundancy is the extra strength of cabling and struts used in bridges. This extra strength allows some structural components to fail without bridge collapse. The extra strength used in the design is called the margin of safety.
Eyes and ears provide working examples of passive redundancy. Vision loss in one eye does not cause blindness but depth perception
is impaired. Hearing loss in one ear does not cause deafness but directionality is lost. Performance decline is commonly associated with passive redundancy when a limited number of failures occur.
Active redundancy eliminates performance declines by monitoring the performance of individual devices, and this monitoring is used in voting logic. The voting logic is linked to switching that automatically reconfigures the components. Error detection and correction and the Global Positioning System (GPS) are two examples of active redundancy.
Electrical power distribution
provides an example of active redundancy. Several power lines connect each generation facility with customers. Each power line includes monitors that detect overload. Each power line also includes circuit breakers. The combination of power lines provides excess capacity. Circuit breakers disconnect a power line when monitors detect an overload. Power is redistributed across the remaining lines.
, author of ''Normal Accidents
'', has said that sometimes redundancies backfire and produce less, not more reliability. This may happen in three ways: First, redundant safety devices result in a more complex system, more prone to errors and accidents. Second, redundancy may lead to shirking of responsibility among workers. Third, redundancy may lead to increased production pressures, resulting in a system that operates at higher speeds, but less safely.
Voting logic uses performance monitoring to determine how to reconfigure individual components so that operation continues without violating specification limitations of the overall system. Voting logic often involves computers, but systems composed of items other than computers may be reconfigured using voting logic. Circuit breakers are an example of a form of non-computer voting logic.
Electrical power systems use power scheduling
to reconfigure active redundancy. Computing systems adjust the production output of each generating facility when other generating facilities are suddenly lost. This prevents blackout conditions during major events such as an earthquake.
The simplest voting logic in computing systems involves two components: primary and alternate. They both run similar software, but the output from the alternate remains inactive during normal operation. The primary monitors itself and periodically sends an activity message to the alternate as long as everything is OK. All outputs from the primary stop, including the activity message, when the primary detects a fault. The alternate activates its output and takes over from the primary after a brief delay when the activity message ceases. Errors in voting logic can cause both outputs to be active or inactive at the same time, or cause outputs to flutter on and off.
A more reliable form of voting logic involves an odd number of three devices or more. All perform identical functions and the outputs are compared by the voting logic. The voting logic establishes a majority when there is a disagreement, and the majority will act to deactivate the output from other device(s) that disagree. A single fault will not interrupt normal operation. This technique is used with avionics
systems, such as those responsible for operation of the Space Shuttle
Calculating the probability of system failure
Each duplicate component added to the system decreases the probability of system failure according to the formula:-
– number of components
– probability of component i failing
– the probability of all components failing (system failure)
This formula assumes independence of failure events. That means that the probability of a component B failing given that a component A has already failed is the same as that of B failing when A has not failed. There are situations where this is unreasonable, such as using two power supplies
connected to the same socket in such a way that if one power supply
failed, the other would too.
It also assumes that only one component is needed to keep the system running.
Secure Propulsion using Advanced Redundant ControlUsing powerline as a redundant communication channel
Category:Fault-tolerant computer systems